Grand Caravan V6-3.8L (2009)
NOTE: Raised plastic edges on each door panel are used to align the hinges to each door panel. Divots in each door panel are used to align the
mounting fasteners holes in the hinge to the door panel and as a starter for the hinge mounting fastener.
1. Place the second load floor panel into position.
2. Install the panel to panel lock (6) as necessary.
3. Line up the hinges (2 and 3) into position to the second panel ensuring the hinges are aligned with the raised plastic edges.
4. Install the fasteners securing the hinges to the second panel.
5. Install the door assembly to the vehicle.
PANEL - THIRD PANEL
NOTE: Raised plastic edges on each door panel are used to align the hinges to each door panel. Divots in each door panel are used to align the
mounting fasteners holes in the hinge to the door panel and as a starter for the hinge mounting fastener.
1. Place the third load floor panel into position.
2. Install the release latch to the third panel and install the fasteners.
3. Install the fasteners to the third panel (2) to flipper door panel (4) hinge (3).
4. Install the fasteners to the second panel (1) to third panel hinge (6).
5. Install the door assembly to the vehicle.
HINGE - PANEL TO PANEL
