Grand Caravan V6-3.8L (2009)
Power Seat Motor: Service and Repair
Power Seat Motor - Removal
Front - Fore Aft Motor
REMOVAL
WARNING: Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat
air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to
discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the
proper precautions may result in accidental airbag deployment and possible serious or fatal injury.
1. Disconnect and isolate the battery negative cable.
2. Remove the inoperative front seat assembly, See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Removal.
3. Remove the flex drive cable cover (2).
a. Using a small flat bladed tool, release the mounting strap (1) that secures the flex drive cable cover (2) to the fore/aft motor (5).
b. Pivot the cover away from the cable and pull it away from the seat frame (4) to disengage the cover slot from the mounting tab (3).
4. Remove the flex drive cable.
a. Carefully bend the flex drive cable at the center and pull the motor end (3) away from the fore/aft motor (1) to disengage.
b. Pull the cable out of the screw drive assembly (2) and remove from seat track.