Grand Caravan V6-3.8L (2009)
10. If required, remove the wire harness retaining bracket (4) from the bottom of the seat riser (2).
11. Remove the two nuts (1) and the two bolts (3) that secure the seat riser to the seat track and remove the riser.
Front Seat Track - Installation
INSTALLATION
NOTE: Driver seat shown in illustrations. Passenger seat similar.
1. Position the seat riser (2) to the seat track and install the retaining two nuts (1) and bolts (3). Tighten the nuts and bolts to 48 Nm (35 ft. lbs.).
2. Install the wire harness retaining bracket (4) onto the seat riser.
NOTE: Heated seat shown. Non-heated seat similar.
3. If removed, install the seat track position sensor (8).