Grand Caravan V6-3.8L (2009)
1. Position exhaust manifold (5) on cylinder head and install bolts to center runner (cylinder #3) and initial tighten to 2.8 Nm (25 in. lbs.).
2. Using a new gasket, attach crossover pipe (1) to exhaust manifold and tighten bolts to 41 Nm (30 ft. lbs.).
NOTE: Inspect crossover pipe fasteners for damage from heat and corrosion. The cross-over bolts are made of a special stainless steel alloy. If
replacement is required, OEM bolts are highly recommended.