Grand Caravan V6-3.8L (2009)
11. Loosen the fitting nuts that secure the underbody refrigerant lines (1 and 2) to the front A/C liquid line (5) and the front A/C suction line (6).
12. Disconnect the front A/C liquid and suction lines from the underbody refrigerant lines and remove and discard the O-ring seals.
NOTE: Replacement of the front heater hoses will be required if the hose ends are cut for removal.
13. Release the spring type hose clamps (4) and disconnect the front heater hoses from the underbody heater lines (3).
14. Support the rear axle with a suitable jack stand and remove the right rear shock mount from the rear frame rail and position the mount and shock
out of the way.
CAUTION: Use care not to damage the ABS wire lead or the brake line when repositioning the brake line bracket.
15. Remove the rear brake line bracket from the rear frame rail and position the bracket, brake line and ABS wire lead out of the way.
16. Disconnect the exhaust system from the four rubber exhaust hanger isolators and position the exhaust system out of the way.
17. Remove the six screws (2 and 3) that secure the underbody lines (1) underneath the vehicle.
18. Rotate and tilt the underbody lines as necessary and remove the lines from the vehicle.
19. Install plugs in, or tape over all the opened refrigerant line fittings and the rear expansion valve ports.
