Grand Caravan V6-3.8L (2009)
6. Install wheel speed sensor (1) into routing clips along underbody of vehicle.
7. Connect vehicle wiring harness (2) to wheel speed sensor connector.
8. Right side sensor only - Install exhaust heat shield above exhaust system covering wheel speed sensor wiring connector.
9. Install brake rotor as well as all components necessary to access it. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Brake Rotor - Installation
10. Perform the Diagnostic Verification Test and clear any faults. See: Brakes and Traction Control/Brake Bleeding/Service and Repair
