Grand Caravan V6-3.8L (2009)
NOTE: Before installing power steering pressure hose on power steering pump, replace O-ring on end of power steering pressure hose.
Lubricate O-ring using clean power steering fluid.
14. Install pressure hose (1) into pump (2) fitting. Thread pressure hose tube nut into pump and tighten to 31 Nm (23 ft. lbs.).
15. Install air cleaner housing cover and hose to intake manifold. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Installation
16. Install negative (-) battery cable on negative battery post.
17. Fill and bleed power steering system. See: Service and Repair/Steering - Power Steering System Bleeding
18. Inspect for leaks.
Return Hose - Gear to Cooler
GEAR TO COOLER
1. Place return hose into engine compartment using reverse order of removal.
2. Install return hose routing clamp over battery tray mounting stud.
3. Install return hose (2) to cooler over return hose (5) from gear tube. Slide hose clamp into position on fluid reservoir and attach it. Be sure hose
clamp is installed past bead on fluid reservoir fitting.
