Grand Caravan V6-3.8L (2009)
5. Install bolt (3) and nut securing track bar (2) to axle (4). Do not tighten at this time.
6. Remove jack from under axle.
7. On each side of vehicle, fasten rear brake flex hose bracket to frame rail.
8. On each side of vehicle, install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and
Wheels - Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
9. Lower vehicle.
10. Position vehicle on alignment rack/drive-on lift. Raise lift as necessary to access the rear suspension while keeping vehicle at curb (riding) height.
11. Check for proper vehicle curb height. See: Alignment/Service and Repair
12. Tighten shock absorber lower mounting bolt nuts (1) to 75 Nm (55 ft. lbs.).