dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Center High Mounted Stop Lamp - Removal|Page 12302 > < Center Mounted Brake Lamp|Locations|Page 12299
Page 1
background image

Center Mounted Brake Lamp: Service and Repair
Center High Mounted Stop Lamp - Removal

REMOVAL

NOTE: The CHMSL illumination on this vehicle is accomplished by LED bulbs and these bulbs are not serviced separately. The CHMSL must
be replaced as a unit.

1. Disconnect and isolate the battery negative cable.
2. Open the rear liftgate, and disconnect the washer hose from the CHMSL unit.
3. Remove the liftgate spoiler assembly.See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Spoiler - Removal
4. Remove the two screws from the CHMSL (1) unit and remove the unit from the liftgate spoiler assembly.

Center High Mounted Stop Lamp - Removal|Page 12302 > < Center Mounted Brake Lamp|Locations|Page 12299