Grand Caravan V6-4.0L (2008)
Control Module HVAC: Service and Repair
Front Blower Motor Power Module - Installation
INSTALLATION
1. Position the blower motor power module (5) into the front HVAC housing (1).
2. Engage the two retaining tabs (3) that secure the blower motor power module to the HVAC housing. Make sure the retaining tabs are fully
engaged.
3. Install the two screws (4) that secure the blower motor power module to the HVAC housing. Tighten the screws to 1.2 Nm (10 in. lbs.).
4. Connect the two wire harness connectors (2) to the blower motor power module.
5. If equipped, install the silencer to the bottom of the instrument panel.
6. Reconnect the negative battery cable.
