dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Keyless Entry Module|Specifications|Page 7266 > < Programming RKE Module|Page 7263
Page 1
background image

EGR Tube: Specifications

EGR Tube to EGR Valve ........................................................................................................................................................11.9 Nm ( 105 ± 20 In. Lbs. ).
EGR Tube to Intake Manifold ................................................................................................................................................ 11.9 Nm ( 105 ± 20 In. Lbs. ).
EGR Tube Plastic Manifold .................................................................................................................................................................  5.7 Nm ( 50 In. Lbs)

EGR Tube Aluminium Manifold  .....................................................................................................................................................  11.9 Nm ( 105 In. Lbs)

The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the
specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws
available for repair. They require a higher torque than the original screws..

Keyless Entry Module|Specifications|Page 7266 > < Programming RKE Module|Page 7263