dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Parking Brake Cable|Adjustments|Page 5341 > < Parking Brake Cable|Adjustments|Page 5339
Page 5
background image

9. Remove the parking brake cable housing retainer from the brake support plate using a 14 mm wrench to compress the retaining fingers. Remove

the cable.

REMOVAL - PARKING BRAKE CABLE (LEFT REAR)

1. Raise vehicle on jackstands or centered on a hoist.
2. Remove rear tire and wheel assembly.
3. Remove rear brake drum from the rear wheel of the vehicle requiring service to the rear park brake cable.

4. Create slack in rear park brake cables by locking out the automatic adjuster as described here. Grasp an exposed section of front park brake cable

near the equalizer and pull down on it. Then install a pair of locking pliers on the cable just rearward of the second body outrigger bracket.

Parking Brake Cable|Adjustments|Page 5341 > < Parking Brake Cable|Adjustments|Page 5339