dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

EGR Tube|Specifications|Page 3438 > < EGR Control Solenoid|Locations|Page 3434
Page 1
background image

EGR Tube: Specifications

EGR Tube to EGR Valve ........................................................................................................................................................11.9 Nm ( 105 ± 20 In. Lbs. ).
EGR Tube to Intake Manifold ................................................................................................................................................ 11.9 Nm ( 105 ± 20 In. Lbs. ).
EGR Tube Plastic Manifold .................................................................................................................................................................  5.7 Nm ( 50 In. Lbs)

EGR Tube Aluminium Manifold  .....................................................................................................................................................  11.9 Nm ( 105 In. Lbs)

The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the
specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws
available for repair. They require a higher torque than the original screws..

EGR Tube|Specifications|Page 3438 > < EGR Control Solenoid|Locations|Page 3434