Grand Caravan AWD V6-3.8L VIN L (2001)
6. Install the disc brake caliper guide pin bolts. Tighten the guide pin bolts to a torque of 22 Nm (192 inch lbs.).
7. Clean all foreign material off the threads of the outer C/V joint stub shaft. Install the washer and hub nut on the stub shaft of the outer C/V joint.
8. Lower vehicle.
9. Set the park brake. This is required to keep the driveshaft from rotating when tightening and torquing the hub nut and driveshaft inner joint to
driveling module mounting nuts.
10. Raise vehicle.
