Grand Caravan AWD V6-3.8L VIN L (2001)
![background image](/dodge/grand_caravan_awd/v6-3.8l_vin_l/Page-1513008.png)
11. Install disc brake caliper adapter to steering knuckle attaching bolts (Fig. 4). Tighten the disc brake caliper adapter attaching bolts to a torque of
169 Nm (125 ft. lbs.)
12. Clean all foreign matter from the threads of the outer CV joint. Install the washer and half shaft to hub/bearing assembly nut on half shaft and
securely tighten nut.
13. Install front wheel and tire assembly. Install and tighten the wheel mounting stud nuts in proper sequence until all nuts are torqued to half the
required specification. Then repeat the tightening sequence to the full specified torque of 135 Nm (100 ft. lbs.).
14. Lower vehicle.
15. With the vehicle's brakes applied to keep hub from turning, tighten the hub nut to a torque of 244 Nm (180 ft. lbs.) (Fig. 14).
16. Install the spring wave washer on the end of the half shaft.