Grand Caravan AWD V6-3.8L VIN L (2001)
6. Tighten nut on crimping tool C-4975-A until jaws on tool are closed completely together, face to face (Fig. 35).
CAUTION: Seal must not be dimpled, stretched, or out-of-shape in any way. If seal is NOT shaped correctly, equalize pressure in seal and shape
it by hand.
7. Position outer CV joint sealing boot into its retaining groove on outer CV joint housing.
8. Install sealing boot to outer CV joint retaining clamp evenly on sealing boot.
9. Place crimping tool C-4975-A over bridge of clamp (Fig. 36).