dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Lighting and Horns|Horn > < Diagram Information and Instructions|Page 9265
Page 1
background image

Headlamp Switch: Service and Repair

1. Remove warning indicator grille by prying up with a flat blade screwdriver.
2. Remove mounting screws from warning indicator module assembly.
3. Remove cluster bezel mounting screws.
4. Tilt column down if possible.
5. Pull cluster bezel out to gain access to switch assembly's snap fingers and push switch out through mounting hole.
6. Disconnect switch and remove switch from vehicle.
7. Reverse procedure to install.

Lighting and Horns|Horn > < Diagram Information and Instructions|Page 9265