Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Installing Caliper Guide Pin Bushing
2. Insert the folded bushing into the caliper housing. Do not use a sharp object to perform this step due to possible damage to the bushing.
Bushing Correctly Installed In Caliper
3. Unfold the bushing using your fingers or a wooden dowel until the bushing is fully seated into the caliper housing. Flanges should be seated evenly
on both sides of the bushing hole.
4. Lubricate the inside surfaces of the bushing using Mopar, Silicone Dielectric Compound or an equivalent.