Grand Caravan FWD V6-229 3.8L VIN L MFI (1997)
Body Control Module Connectors
31. Disconnect the lower two, forty pin wire harness connectors, from the main Junction Block near left cowl side panel.
32. Disconnect the instrument panel wire harness connector from the bottom of Body Control Module.
40 Way Connectors
33. Disconnect the two forty pin connectors from the right of the steering column.
34. Remove the clinch bolt holding upper the steering shaft to the lower steering shaft.
35. Separate the upper steering shaft from the tower steering shaft.
36. Remove the nuts holding the instrument panel frame to the die-cast brake pedal support on each side of the steering column.
37. With mechanical transmission range indicator:
-
Remove the indicator cable loop.
-
Remove the clip holding gear shift cable end to the gear selector adaptor
-
Pull the cable end from gear selector.
-
Disconnect the clip for the indicator cable and guide tube from the shift cable bracket and move out of the way.
38. Remove the nut holding gear shift cable bracket to the instrument panel frame.
39. Remove the bracket from the instrument panel.
40. Remove the screw holding hood release handle to the instrument panel.