Grand Caravan FWD V6-3.3L VIN R (1999)
Crankshaft Damper: Service and Repair
REMOVAL
1. Disconnect negative cable from battery.
2. Raise vehicle on hoist.
3. Remove right wheel and inner splash shield.
4. Remove drive belt.
Crankshaft Damper-Removal
5. Remove crankshaft pulley.
INSTALLATION
Crankshaft Damper-Installation
1. Install crankshaft pulley using plate L-4524, thrust bearing/washer and C-4685-Cl, 5.9 inch screw.
2. Install drive belt.
3. Install inner splash shield and wheel.
4. Connect negative cable to battery.
