dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Mount|Page 1533 > < Front Mount|Page 1531
Page 1
background image

Engine Mount: Service and Repair
Rear Mount

REAR MOUNT

REMOVAL 

1. Raise vehicle on hoist.
2. Support the transmission with a transmission jack so it will not rotate.
3. Remove the insulator through bolt from the mount and rear suspension crossmember.
4. Remove the four transmission mount fasteners and remove the mount.

INSTALLATION 

Engine Mounting-Rear

1. Reverse the removal procedure for installation. Tighten through bolt to 75 Nm (55 ft. lbs.). 

Front Mount|Page 1533 > < Front Mount|Page 1531