dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headlamp Control Module > < Hazard Warning Switch|Diagrams|Page 6936
Page 1
background image

Headlamp Bulb: Service and Repair

REMOVAL

1. Release hood latch and open hood.
2. From behind radiator closure panel, disconnect wire connector from back of headlamp bulb base.
3. Rotate headlamp bulb retaining ring counterclockwise.

Headlamp Bulb

4. Remove retaining ring from headlamp.
5. Pull headlamp bulb from back of headlamp.

INSTALLATION

CAUTION:  Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

1. From behind radiator closure panel, insert headlamp bulb into back of headlamp.
2. Engage retaining ring onto headlamp.
3. Rotate headlamp bulb retaining ring clockwise.
4. Connect wire connector into headlamp bulb base.
5. Verify headlamp alignment.

Headlamp Control Module > < Hazard Warning Switch|Diagrams|Page 6936