Intrepid V6-2.7L VIN R (2003)
Cabin Ventilation Grille: Service and Repair
BODY VENT
REMOVAL
1. Open decklid.
Fig. 3
2. Move trunk carpet to access the air exhauster in the right/left rear corner of the trunk (Fig. 3).
3. From inside trunk push the air exhauster outward to release clips.
4. Reach under fascia and pull air exhauster outward from trunk side panel.
5. Remove air exhauster from vehicle.
INSTALLATION
1. Place air exhauster in position. Ensure that the locator tab is aligned.
2. Engage the upper half of the air exhauster then push the lower half in until the clips click into place.
3. Install trunk carpet into position.
