Intrepid V6-2.7L VIN R (2003)
Cruise Control Vacuum Reservoir: Service and Repair
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the Powertrain Control Module (PCM) refer to the Fuel Injection System section.
3. Remove and reposition coolant reservoir.
4. Remove PDC and bracket.
5. Remove vacuum reservoir.
6. Disconnect vacuum hose
INSTALLATION
1. Connect vacuum hose.
2. Install vacuum reservoir and tighten fasteners.
3. Install PDC and bracket and tighten fasteners.
4. Install coolant reservoir.
5. Install PCM refer to the Fuel Injection System section.
6. Connect the negative battery cable.
