Intrepid V6-2.7L VIN R (2003)
Driver/Vehicle Information Display: Service Precautions
NOTE:
-
IF THE EVIC MODULE IS BEING REPLACED, THE TIRE PRESSURE MONITORING SYSTEM MUST BE PROGRAMMED. REFER TO
THE TIRES/WHEELS SECTION FOR DETAILED INSTRUCTIONS.
-
IF A NEW COMPASS MINI-TRIP COMPUTER HAS BEEN INSTALLED, THE COMPASS WILL HAVE TO BE CALIBRATED AND THE
VARIANCE SET. REFER TO COMPASS VARIATION ADJUSTMENT AND COMPASS CALIBRATION IN THE SERVICE
PROCEDURES SECTION OF THIS GROUP FOR THE PROCEDURES.
-
IF THE EVIC MODULE IS BEING REPLACED, THE TIRE PRESSURE MONITORING SYSTEM MUST BE PROGRAMMED. REFER TO
THE TIRES/WHEELS SECTION FOR DETAILED INSTRUCTIONS.
-
SOME 300M VEHICLES USE A DIFFERENT RECOMMENDED TIRE PRESSURE (TIRE SPECIFIED). FOR THIS REASON, ANYTIME A
EVIC MODULE IS REMOVED OR REPLACED A DRB III SCAN TOOL MUST BE USED TO SET/VERIFY THAT THE CORRECT TIRE
PRESSURE SET-POINT IS PROGRAMMED IN THE EVIC MODULE. FAILURE TO DO SO COULD RESULT IN INCORRECT TIRE
PRESSURE MONITORING SET POINTS.
