Intrepid V6-2.7L VIN R (2003)
Brake Light Switch: Description and Operation
Fig. 1 Brake Lamp Switch
The brake lamp switch is located under the instrument panel at the brake pedal arm. This switch contains three internal switches controlling various
functions of the vehicle, one of them controls operation of the vehicle's brake lamps. Other functions of the internal switches include speed control
deactivation and brake sense for the ABS and the brake transmission shift interlock.
The brake lamp switch has three internal switches used for various functions. Among these are:
-
Brake lamp actuation
-
Speed control deactivation, and
-
Brake sense for ABS and brake transmission shift interlock
When the brake pedal is in the released position, the plunger on the outside of the brake lamp switch is pushed inward by the brake pedal. In this
position, the electrical contacts for one internal switch are open while the electrical contacts for other two internal switches are closed.
When the brake pedal is pressed, the plunger on the outside of the brake lamp switch extends outward. This action closes the electrical contacts for the
one internal switch and opens the contacts for the remaining two switches within the brake lamp switch. The internal switch which closes when the brake
pedal is pressed completes the circuit to the brake lamps at the rear of the vehicle, thus allowing illumination of the brake lamps and the
Center-High-Mounted Stop Lamp (CHMSL).
