Intrepid V6-2.7L VIN R (2003)
Fig. 7 Negative Jumper Start Attachment
5. Connect one end of the negative jumper cable to the negative jump start attachment of the booster battery. Connect the other end of the cable to
the negative jump start attachment of the discharged battery (Fig. 7). Ensure that the jump cable clamps have good connections.
6. Start the engine in the vehicle which has the booster battery let the engine idle a few minutes, then start the engine in the vehicle with the
discharged battery.
CAUTION: Do not crank starter motor on disabled vehicle for more than 15 seconds, starter will overheat and could fail.
7. When removing the jumper cables:
-
Disconnect jumper cable negative clamp from the disabled vehicle.
-
Disconnect the jumper cable negative clamp from the booster battery start attachment.
-
Disconnect jumper cable positive clamp from disable battery start attachment.
-
Disconnect jumper cable positive clamp from booster battery start attachment.