Intrepid V6-2.7L VIN R (2003)
^
PT vehicles equipped with a 2.4L engine (sales code EDZ)
^
DN vehicles equipped with a 4.7L engine (sales code EVA)
SYMPTOM/CONDITION:
The software contains the following improvements for all customers:
^
A MIL illumination for P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1
^
A MIL illumination for P0344 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 1
DIAGNOSIS:
Using a Scan Tool (DRBIII(R) or StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are
functioning as designed. If DTCs are present record them on the repair order and repair as necessary before proceeding further with this bulletin.
If the vehicle operator describes or experiences the Symptom/Condition, perform the Repair Procedure.
PARTS REQUIRED:
SPECIAL TOOLS / EQUIPMENT REQUIRED:
REPAIR PROCEDURE - USING StarSCAN AND THE INTERNET TO RETRIEVE THE
FLASH FILE:
1. Reprogram the PCM with the latest software. Follow the detailed service procedures available in DealerCONNECT/TECHCONNECT, Refer To 8 -
Electrical/Electronic Control Modules/Powertrain Control Module - Standard Procedure PCM/ECM Programming - Gas.
2. Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach it near the VECI label.
REPAIR PROCEDURE FOR DOMESTIC VEHICLES USING DRBIII(R) AND DOWNLOADING THE FLASH FILE FROM DealerCONNECT:
