Intrepid V6-2.7L VIN R (2003)
Child Seat Tether Attachment: Service and Repair
Child Tether Cup
REMOVAL
1. Remove the rear shelf trim panel from vehicle.
2. Turn the shelf panel over so that the bottom side is upward to access the Child Tether Cup locks.
3. With a trim stick (special tool #C-4733) or equivalent, push attachment locks toward the center of the cup to release the Child Tether Cup from the
rear shelf panel.
4. Remove the Child Tether Cup.
INSTALLATION
1. Place the Child Tether Cup into position on top of the rear shelf trim panel.
2. Press rearward until cup engages into the rear shelf trim panel.
3. Push the front of cup down into the rear shelf trim panel
4. Install the rear shelf panel
