Intrepid V6-2.7L VIN R (2003)
6. Install the power steering pressure hose in the pressure fitting of the power steering pump. Tighten the power steering fluid pressure hose tube nut
to a torque of 47 Nm (35 ft. lbs.).
7. Install the power steering fluid return hose on the power steering fluid reservoir. When installing the hose clamp on the power steering fluid return
hose be sure the clamp is installed past the upset bead on the nipple of the power steering fluid reservoir.
8. Connect the battery ground cable onto the ground stud located on the strut tower.
9. Perform Power Steering Pump Initial Operation procedure to properly refill and bleed power steering system.
