Intrepid V6-2.7L VIN R (2003)
Tie Rod End: Service and Repair
Inner Tie Rod Bushing
BUSHING INNER TIE ROD
REMOVAL - INNER TIE ROD BUSHING
NOTE: When servicing inner tie rod bushings, replacement of both inner tie rod bushings is recommended.
1. Remove the battery ground cable from the ground stud on the shock tower and isolate the ground cable by installing the cable isolator on the
ground stud.
2. Remove caps from both wiper arms at the attachment to the pivots to expose the wiper arm attaching nut. Remove the nut attaching each wiper arm
to its pivot.
3. Remove the wiper arms from the pivots. Wiper arms are removed from the pivots by rocking them back and force on the pivots until they can be
pulled off the pivots.
4. Remove the wiper module cover and cowl cover from the vehicle.
