dodge Workshop Repair Guides

Dodge Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

2. Position the hub and bearing assembly face down with stud pointing down into the well of the 21 mm socket. The hydraulic press ram must line up

with the stud.

3. Press the stud into the hub flange until it bottoms.
4. Remove the hub and bearing assembly from the press.
5. Install the hub and bearing on the vehicle. 

Steering and Suspension > Wheels and Tires > Wheel Fastener > Component Information > Service and Repair > Front > Page 6529

< PREV PAGE NEXT PAGE >