Intrepid V6-201 3.3L Flex Fuel (1994)
Water Pump: Fundamentals and Basics
Installation Tips and Hints
WATER PUMP INSTALLATION NOTES
-
Compare the old pump to the new pump and verify:
-
Shaft lengths match exactly.
-
Retaining bolt holes match exactly.
-
Verify the retaining bolts and bolt holes have clean threads. Re-tap or chase the threads as necessary.
-
Do not over tighten the retaining bolts, use a torque wrench to properly tighten the bolts to the correct specification.
CAUTION: Water pump retaining bolts may be easily broken or stripped, do not tighten the retaining bolts with an air wrench or impact gun.
-
When tightening hose clamps:
-
Position the hose squarely on the fitting.
-
Verify the hose clamp is clear of the retaining rim on the fitting. Do not over tighten the clamps.
-
While working on the cooling system it is a good habit to clean the radiator and A/C condenser fins of bugs and dirt. This build up of debris can
seriously reduce the cooling ability of the system.