Intrepid V6-201 3.3L VIN T SFI (1997)
License Plate Bulb: Service and Repair
LH/CP
REMOVAL
1. Remove screws holding license plate lamp to rear bumper fascia.
2. Separate license plate lamp from rear bumper fascia.
License Plate Lamp Bulb
3. Remove socket from lamp.
4. Pull bulb from socket.
INSTALLATION
1. Push bulb into socket.
2. Install socket into lamp.
3. Place license plate lamp in position on rear bumper fascia.
4. Install screws to hold license plate lamp to rear bumper fascia.