dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Body Mounted Door Opening Weatherstrip - Loose|Page 7985 > < Body - Wind Noise Heard in Interior|Page 7979
Page 1
background image

Weatherstrip: All Technical Service Bulletins
Body Mounted Door Opening Weatherstrip - Loose

NUMBER: 23-20-00

GROUP: Body

DATE: May, 12, 2000

SUBJECT:
Body Mounted Door Opening Weatherstrip Loose

OVERVIEW:
This bulletin involves installing clips to secure weatherstrips to the pinch flange.

MODELS:
1998 - 2000 (LH) Concorde/Intrepid/LHS/3OOM

SYMPTOM/CONDITION:
Body mounted weatherstrip (primary weatherstrip) is loose or pulls away easily from the pinch flange.

DIAGNOSIS:
Inspect weatherstrip where it has pulled away from the pinch flange for damage. If weatherstrip is damaged, replace it. If the weatherstrip is OK, perform
the Repair Procedure.

PARTS REQUIRED:

1

05019585M

Clip, Weatherstrip

REPAIR PROCEDURE:

THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND DOES NOT REQUIRE HOISTS OR
OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT.

1.

Install clip, p/n 05019585AA, on the pinch flange in area where weatherstrip is loose. One clip in the center of the pulled away area should be
enough (Figure 1).

2.

Install the weatherstrip over the clips and pinch flange.

NOTE:  

WEATHERSTRIPS CAN BE INSTALLED WITHOUT REMOVING TRIM PANELS.

Body Mounted Door Opening Weatherstrip - Loose|Page 7985 > < Body - Wind Noise Heard in Interior|Page 7979