Intrepid V6-3.2L VIN J (1998)
Keyless Entry Module: Service and Repair
Replacement
The Remote Keyless Entry (RKE) Module is located between the junction block and body control module. Refer to Instrument Panel, Gauges and
Warning Indicators/Instrument Panel and Systems for Junction Block/BCM Removal and Installation procedures.
REMOVAL
1. With the junction block/BCM removed, separate the two. Refer to Instrument Panel, Gauges and Warning Indicators/Instrument Panel for BCM
Removal and Installation procedures.
Remote Keyless Entry Module Location
2. Remove the three retaining screws to RKE Module and separate from BCM.
INSTALLATION
-
For installation, reverse the above procedures.
NOTE: The RKE transmitters must be reprogrammed to the new RKE module.