dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Clutch, A/T > < Shift Solenoid, A/T|Service and Repair
Page 1
background image

Bell Housing: Technical Service Bulletins
Engine to Transmission Dowel - Service

NO: 09-02-98

GROUP: Engine

DATE: Apr. 3, 1998

SUBJECT: 
Engine to Transmission Dowel Service

MODELS:
1998 - 1999 (LH) Concorde/Intrepid/LHS/300M

NOTE:

THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 3.2L OR 3.5L ENGINE.

DISCUSSION:

A running change was made on March 23, 1998 to the engine to transmission dowel length and block counterbore depth. The new dowel, p/n
06505643AA, is 16.5 mm long, the old dowel, p/n 05240849, was 12.5 mm long. Correspondingly the block counterbore depth is increased by 4 mm.
The new dowel length and block counterbore depth cannot be mixed during service. The new and old dowels must protrude from the rear face of the
block by 6.35 mm or they will not assemble into the transmission.

POLICY: Information Only

Clutch, A/T > < Shift Solenoid, A/T|Service and Repair