Intrepid V6-3.5L VIN G (2002)
Power Seat Switch: Description and Operation
Fig. 1 Memory and Heated Seat Switches
Memory Selector Switch
MEMORY SET SWITCH
The memory selector switch is mounted on the drivers seat cushion side shield, within easy reach of the driver. This switch provides a way to set
new and recall preset positions of seat, seat recliner, and the side view mirror. There are three separate switches incorporated into the memory set
switch. The memory position set switch and memory position one and two switches.
The memory set switch cannot be repaired or adjusted. If one switch is damaged or faulty the entire memory set switch must be replaced.
When the memory set switch is depressed, a resistance multiplexed signal is sent to the memory/ heated seat module via hard wired connections.
The memory/heated seat module than receives this hard-wired input and moves the power seat track/side view mirror according to the preset
position. When the memory system is in set mode a chime will be generated by the body control module.
See the owner's manual in the vehicle glove box for more information on the features, use and operation of the memory switch.
DRIVER POWER SEAT SWITCH
Vehicles equipped with power seats utilize a eight-way driver power seat switch This eight way power seat switch features two knobs ganged
together on the outboard seat cushion side shield.
The switch is secured to the back of the seat cushion side shield with two screws. However, the control knobs for the eight-way power seat switch
unit must be removed before the seat switch can be removed from the side shield.
The power seat switch cannot be repaired. If one switch is damaged or faulty, the entire power seat switch assembly must be replaced.