Intrepid V6-3.5L VIN G (2002)
Timing Belt Tensioner: Service and Repair
TIMING BELT TENSIONER & PULLEY
REMOVAL - TENSIONER PULLEY ASSEMBLY
1. Remove the timing belt.
2. Remove the timing belt tensioner pulley and bracket assembly by unscrewing the pivot bolt from the oil pump housing (Fig. 142).
REMOVAL - TENSIONER
1. For timing belt tensioner removal procedure, Refer to TIMING BELT AND SPROCKETS - REMOVAL - TIMING BELT.
INSPECTION - TENSIONER PULLEY ASSEMBLY
NOTE: The tensioner pulley, bracket, and pivot bolt are serviced as an assembly.
1. Inspect pulley for free movement (Fig. 142). Replace if pulley is loose, seized, or rough turning
2. Inspect pulley bearing and seal (Fig. 142). Replace if damaged.
3. Inspect pivot bolt for free movement in tensioner bracket (Fig. 142). Replace assembly if seized or excessive looseness.
INSPECTION - TENSIONER