Intrepid V6-3.5L VIN G (2002)
Seals and Gaskets: Service and Repair
Seal - Stub Shaft (Long)
42LE - Automatic Transmission
SEAL - STUB SHAFT LONG
REMOVAL
If it has been diagnosed that the long stub shaft seal is leaking, the following procedure can be used to replace failed seal. This procedure will allow the
replacement of the seals without having to set backlash and measure differential bearing turning torque.
CAUTION: The differential bearings and the differential adjusters must be reused in order to use this procedure. If any of the items listed above require
replacement, this procedure cannot be used.
1. Remove transaxle from vehicle.
2. Remove long stub shaft from transaxle (Fig. 333).