Intrepid V6-3.5L VIN K (2003)
6. Lower vehicle enough for access to park brake foot pedal. Fully apply park brakes.
NOTE: Leave park brakes applied until adjustment is complete.
7. Raise vehicle again.
8. Tighten adjusting nut at equalizer until mark on tensioner rod moves into alignment with edge of tensioner bracket.
CAUTION: Do not loosen, or tighten the tensioner adjusting nut for any reason after completing adjustment.
9. Lower vehicle until rear wheels are 15 - 20 cm (6 - 8 inch) off shop floor.
10. Release park brake foot pedal and verify that rear wheels rotate freely without drag. Verify pedal returns to the fully released position.
11. Lower vehicle to the ground.
