Intrepid V6-3.5L VIN K (2003)
cylinder head oil holes for clogging.
2. Check the cam lobe and bearing surfaces for abnormal wear and damage. Replace camshaft if defective.
NOTE: If camshaft is replaced due to lobe wear or damage, always replace the rocker arms.
3. Measure the lobe actual wear (Fig. 21) and replace camshaft if out of limit. Standard value is 0.0254 mm (0.001 in.), wear limit is 0.254 mm
(0.010 in.).
INSTALLATION
1. Lubricate camshaft bearing journals and camshaft lobes with clean engine oil and install camshaft into cylinder head (Fig. 20).
2. Install cylinder head(s).
3. Install the rocker arm assembly.
4. Install camshaft sprockets and timing belt.