Intrepid V6-3.5L VIN K (2003)
Crankshaft Main Bearing: Removal and Replacement
CRANKSHAFT MAIN BEARINGS / REMOVAL
Bearing caps are not interchangeable and are marked to insure correct assembly (Fig. 68). Upper and lower bearing halves are NOT interchangeable.
1. Remove oil pan.
2. Remove oil pick-up tube and windage tray.
3. Identify bearing caps before removal (Fig. 68).
4. Remove bearing caps one at a time. Remove upper half of bearing by inserting Special Main Bearing Tool C-3059 (Fig. 69) into the oil hole of
crankshaft.
5. Slowly rotate crankshaft clockwise, forcing out upper half of bearing shell.