Intrepid V6-3.5L VIN K (2003)
Intake Manifold: Service and Repair
Lower Intake Manifold
INTAKE MANIFOLD LOWER
REMOVAL
1. Perform fuel pressure release procedure.
2. Drain the cooling system.
3. Disconnect the radiator upper hose from the coolant outlet at front of manifold.
4. Remove the upper intake manifold.
5. Disconnect the electrical connectors to fuel injectors and coolant temperature sensor.
6. Disconnect heater and coolant bottle supply hoses from coolant tube at rear of intake manifold (Fig. 127).
7. Disconnect the fuel supply hose from fuel rail.
8. Remove the screw attaching the fuel rail support bracket to the throttle body support bracket.
9. Remove the bolts attaching fuel rail.
10. Remove fuel rail and injectors as an assembly.