Intrepid V6-3.5L VIN K (2003)
The NGC case is shielded to prevent RFI and EMI. The PCM case is grounded and must be firmly attached to a good, clean body ground.
Internally all grounds are connected together. For EMI and RFI protection the case is also grounded separately from the ground pins.
5 VOLT SUPPLY - PCM OUTPUT
The PCM supplies 5 volts to the following sensors:
-
A/C pressure transducer
-
Engine coolant temperature sensor
-
Manifold absolute pressure sensor
-
Throttle position sensor
-
Linear EGR solenoid
-
Battery temperature
-
Knock sensor
-
Crankshaft position sensor
-
Camshaft position sensor