Intrepid V6-3.5L VIN K (2003)
10. Remove the pinch bolt from the spindle.
CAUTION: When inserting center punch into rear spindle, use care so point of center punch does not puncture strut assembly.
11. Insert a center punch into the hole on the spindle. Center punch must be tapped into the hole in the spindle until jammed into place. This will
spread the spindle casting allowing it to be removed from strut assembly.
12. Using a hammer and a brass drift punch, tap on top surface of spindle, driving it off the end of the strut assembly.
INSTALLATION - SPINDLE
