dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Satellite Radio Antenna - Removal|Page 7838 > < Radio Antenna C1 (Headliner) 2 Way|Page 7835
Page 1
background image

Antenna, Radio: Service and Repair
Satellite Radio Antenna - Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Lower the appropriate portion of the headliner as necessary to access the underside of the antenna See: Body and Frame/Interior Moulding /

Trim/Headliner/Service and Repair/Headliner - Removal.

3. Disconnect the antenna electrical connectors.
4. Remove the fastener and retainer.
5. From inside the vehicle, using a flat bladed tool, depress one of the retaining tabs on the antenna. Push one side of the antenna connector through

the roof panel. Depress the other side of the connector and remove the antenna.

Satellite Radio Antenna - Removal|Page 7838 > < Radio Antenna C1 (Headliner) 2 Way|Page 7835