Journey AWD V6-3.5L (2009)
Trailer Towing Relay: Service and Repair
Trailer Tow Relay - Removal
REMOVAL
TRAILER TOW STOP/TURN RELAYS
1. Disconnect and isolate the battery negative cable.
2. Remove the rear fascia from the vehicle. See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover / Fascia/Service and Repair/Rear
Bumper Fascia - Removal
3. Disengage the left or right trailer tow stop/turn relay and connector from the isolator envelope (3) secured to the trailer tow wire harness (6) along
the left or right body side aperture (2) just below the outer tail lamp.
4. Pull the relay straight out from the wire harness connector.
TRAILER TOW STOP LAMP RELAYS
1. Disconnect and isolate the battery negative cable.
2. Remove the rear fascia from the vehicle. See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover / Fascia/Service and Repair/Rear
Bumper Fascia - Removal
3. Disengage the left or right trailer tow stop lamp relay and connector from the isolator envelope (4) secured to the trailer tow wire harness (6) on
the underside of the rear bumper reinforcement (1) on the left or right side of the 4-way trailer tow connector (5).
4. Pull the relay straight out from the wire harness connector.