Journey AWD V6-3.5L (2009)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Inner Cover - Removal
REMOVAL
1. Open the hood.
2. Remove the two push-pins (1) securing the cowl top screen at the ends. Remove the remaining push-pins (2). Remove the cowl top screen (3).
3. Remove the wiper arms. See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arm - Removal
4. Remove the push-pins (1) securing the cowl screen to the wheelhouse brace and cowl. Rotate the screw (2) in the center of the cowl screen 90°
clockwise to release the screen.
5. Remove the cowl screen (3).