Journey AWD V6-3.5L (2009)
Hood Sensor/Switch (For Alarm): Service and Repair
Vehicle Theft Security Hood Ajar Switch - Installation
SWITCH
NOTE: Self-adjustment of the hood ajar switch is a one-time feature. If the switch is damaged, ineffective, removed or requires readjustment,
it must be replaced with a new unit.
1. Position the hood ajar switch (1) above the hole in the mounting bracket (2).
2. Press the switch into the mounting hole until the integral switch latch tabs lock it into place.
3. Connect the harness connector (3) to the switch connector receptacle.
4. Reconnect the battery negative cable.
5. Close and latch the hood.